Nagys Customs 8" Kicker Solo-Baric Adapter Rings (Pair)

Nagys Customs 8" Kicker Solo-Baric Adapter Rings (Pair)
Nagys Customs 8" Kicker Solo-Baric Adapter Rings (Pair)
Nagys Customs 8" Kicker Solo-Baric Adapter Rings (Pair)
Nagys Customs 8" Kicker Solo-Baric Adapter Rings (Pair)
Nagys Customs 8" Kicker Solo-Baric Adapter Rings (Pair)
Nagys Customs 8" Kicker Solo-Baric Adapter Rings (Pair)
Nagys Customs 8" Kicker Solo-Baric Adapter Rings (Pair)
Nagys Customs 8" Kicker Solo-Baric Adapter Rings (Pair)
Nagys Customs 8" Kicker Solo-Baric Adapter Rings (Pair)
Nagys Customs 8" Kicker Solo-Baric Adapter Rings (Pair)
Nagys Customs 8" Kicker Solo-Baric Adapter Rings (Pair)
Nagys Customs 8" Kicker Solo-Baric Adapter Rings (Pair)
Nagys Customs 8" Kicker Solo-Baric Adapter Rings (Pair)
Nagys Customs 8" Kicker Solo-Baric Adapter Rings (Pair)
Nagys Customs 8" Kicker Solo-Baric Adapter Rings (Pair)
Nagys Customs 8" Kicker Solo-Baric Adapter Rings (Pair)
Nagys Customs 8" Kicker Solo-Baric Adapter Rings (Pair)

Nagy

$199.99 

8" KICKER SOLO-BARIC ADAPTER RING KIT

GET THAT SQUARE BASS IN YOUR BAGS!!

FITS ALL YEARS 98-CURRENT

Square Matters

The Solo-Baric L7S's square sub design delivers dependable bass - even when pushed to the limit. Dual voice coils with high-temp copper windings easily handle intense heat and power levels for clean, clear bass anytime. Be sure and seal the bags wih the "Closeout Kit" below.

CLOSEOUTS FOR SEALING THE BAGS NOT INCLUDED, CHOOSE WHEN CHECKING OUT BELOW.

These are a CNC molded 10” wheel side mount adapter with a  10.7” OD, 9” ID 5*, and a ½” mounting surface tilt to follow the flow more of the outside of the saddle bag, to allow a deeper speaker to be mounted with enough room for proper ventilation. Max mounting depth will vary by bag manufacture.

Fitment will also vary by bag manufacture.  Using a Quality bag or stock bag will achieve the best results. The inside diameter may have to be opened slightly as there are different speaker manufactures on the market.

MUST BE PREDRILLED PRIOR TO USING SCREWS. DO NOT USE SELF TAPPING SCREWS


It is recommended but not necessary to use a 2 part epoxy to bond the adapter to the saddle bag. A good example would be 3M 08115. You should also have some knowledge of body work as you will be cutting the saddle bag.
**due to many variations of saddle bags these were CNC using stock bags. Depending on the bag slight modifications may have to be done to the adapter. I.E sanding to the mounting face of the adapter or use of silicon caulk to fill in small gaps. Using a quality aftermarket or stock bag will achieve the easiest and best results.

Custom Made Parts, all sales are Final

Sold in pairs

Our brands